Scanjet Macron magnetic float level switches are built using standard switch components to satisfy “special” switch requirements.

The Scanjet Macron float level switches are engineered for most of extreme liquid level control applications

Basic Principle
Magnetic type float level switches detect the liquid level and send out contact signals of micro switch by ON-OFF action.

A magnetic action between two magnets fully separated by each partition wall is utilized. One is built in the end of the float and the other is attached on the switch unit in the housing.

Application
Magnetic type float level switches are widely used for HFO storage and settling tanks, MDO, sludge tanks, fresh water tanks, lube oil tanks and others for high level overfill alarms.

Also for water ingress detection in engine rooms and large compartments when fitted in bilge wells.